Check out the new high end MTX Series Graphical Multimeters from AEMC. All the features you need with high accuracy, high resolution, high bandwidth, and low cost. They're even equipped with PC-compatible anaylsis software so you can store and export your data into Word or Excel. See the full lineup by clicking AEMC under the manufacturers tab or DMMs on categories tab.
Wilcom F6230A Visual Fault Locator
The Model F6230A is a streamline universal Visual Fault Locator. Commonly known as a VFL, the new product Model F6230A, is a pencil style VFL that features a universal connector accepting any optical connector style with a 2.5mm ferrule. It operates on a single 1.5V AA alkaline battery keeping the overall size to a minimum while providing long battery life. Unlike many VFLs today, the F6230A features a choice of continuous or modulated output and a low battery indicator to alert the user when it is time to change batteries. The universal connector eliminates the inconvenience of having to use a patch cable for direct connection to fiber under test if connector styles are dissimilar. This single basic tool is one that all installers, and maintenance personnel should have in their tool kit. It is the most economical test tool for quickly verifying continuity, checking the validity of patch cables before or after installation, test and find breaks in LANs, verifying short lengths of installed fiber, or looking for cracked fiber in splice cases, bad connectors, tight crimps in fiber cable, backbone breaks or anywhere light continuity needs checking.
Click products/fiber optic testers on the home page for complete specifications.
Wilcom Hand-Held Fiber Optic Identifier
The Wilcom Model F6121A Optical Fiber Identifier is a rugged, easy-to-use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a singlemode fiber. By utilizing local detection technology (nondestructive macro-bend detection), the unit eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.
For complete specs click products/fiber optic testers on the home page.
The Wilcom Models F6222 and F6222C Optical Fiber
Identifier are a rugged, easy-to-use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a singlemode fiber. The Model F6222C Optical Fiber Identifier is designed specifically to meet the needs of the CATV industry. By utilizing local detection technology
(non-destructive macro-bend detection), both units eliminate the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service.
Both Optical Fiber Identifiers detect low frequency tones at 270 Hz, 1000 Hz and 2000 Hz. When traffic is present on the fiber under test, an audible tone can be heard as well as the traffic direction which is indicated by LEDs illuminating on the probe. During installations, maintenance, rerouting, or restorations it is often necessary to isolate a specific fiber
without disrupting service. A light source such as
Wilcom's Model FS1316 used in conjunction with the
Optical Fiber Identifiers can make the job a lot easier.
The Optical Fiber Identifiers include a carrying pouch containing three easy to use field interchangeable adapter heads to accommodate; 900 ėm buffered fiber, ribbon or 250ėm coated fiber and 3mm jacketed fiber.
Kenwood/Texio FGX-293 Arbitrary Function Generator
Generation of arbitrary waveform with max. 500Kpoint length. Wide range from 10uHz to 31MHz.
FGX-293 is a function generator incorporating arbitrary waveform capability. It can generate arbitrary waveform with 12bit resolution, max. 500K point length, and max. 50MS/s sampling rate.
Waveform can be outputted by each mode of continuous, triggered, gate, or burst with internal or external reference. It can match to wide variety of use with combining various sweep functions, AM, FM, and FSK modulation. Owing to editing function for automatic increment, line draw, defined waveform, etc., easy generation of arbitrary waveform can be realized. Also control by PC is possible by standard equipped RS-232C and GPIB.(SCPI compatible).
Click the products tab/function generators on the home page for complete downloadable specs.
Kenwood FG-281 15MHz Function Generator
The Kenwoood FG-281 features a wide band output from 0.01Hz to 15MHz with 50ppm high frequency accuracy with a Direct Digital Synthesizer. GP-IB and RS-232C remote control are standard. For complete specs click products/function generator on the home page.
